Rubber conveyor belts,transmission rubber belts,rubber conveyor belts manufacturer,transmission rubber belts supplier,India

Manufacturing and exporting a wide range of Rubber Conveyor Belts, Transmission Rubber Belts, etc, that have low elongation and high tensile strength....

About Us

The production processes generally require bulk handling of products, which need to be moved to considerable distances. The conveyor belts are an apt solution for such requirements. Consequently, Gilson Industries is involved in production of highly durable conveyor belts since its inception in 1979. Due to our business acumen and premium quality product range, we have successfully established ourselves as a renowned manufacturer, exporter and supplier in the industry.

Our product basket comprises of a wide range of Rubber Conveyor Belt, Flat Transmission Belts and Conveyor Belt Fasteners. Almost all types of our conveyor belts are manufactured in conformity with IS:1891 International standard. We cater to varied markets across the globe and have gained many prestigious clients through our impeccable product range.

Products Offered

We completely understand the varied needs of our customers and provide them with customized solutions. Our product offerings are as follows:

CONVEYOR BELTS:

Grade	Application Characteristics	Conforming to Standards	Recommended For	Reinforcement Material
N-17	Moderately abrasive and non abrasive materials.	IS 1891 (part I) BS 490(part I) DIN 22102 IPSS-2-03-006	Rubble, sand (sharp), cement (ground), clay, slacked lime, charcoal, super phosphate (lump and powder), coal, ashes, soda earth, sand (smooth), pulp (dry) etc.	NN, EP
M-24	High tensile strength, superior in abrasion and cut resistance. Transporting highly abrasive materials.	IS 1891 (part I) BS 490(part I) DIN 22102 IPSS-2-03-006	Limestone, metallic ores, granite, Quartz, sand, BF clinker and slag, stone chips slate, coke, Sinter gravel etc.	NN, EP
HR	Heat and abrasion resistant lump 125o C (max) fines 100o C (max)	IS 1891(Part II)	Very good for general hot and moderately abrasive materials.	NN, EP
SHR	Heat and abrasion resistant lump 150o C (max) fines 125o C (max)	IS 1891(Part II)	Best for general hot materials and services such as steel clinker, hot sintered ores, steel pallets and others.	NN, EP
FR	Areas prone to fire hazards.	IS 1891 (part 5) CAN/CSA-M422-M87 DIN 22103 JISK 6324 AS-1334	Coal, coke and other fire prone materials.	NN, EP
FR-79	Extra high prone to fire hazards.	IS 1891 (part 5) CAN/CSA-M422-M87 DIN 22103 JISK 6324 AS-1334	Coal, coke and other fire prone materials.	NN, EP
OR		As Per International Standards	Carrying parts and components coated with machine oil & other oily materials.	NN, EP
Rough Top		As Per International Standards	These belts are specially designed with a Rough Top / Pimpled or Ribbed / Cleated carrying surface to prevent slippage.	Ideally suited to carry packaged materials on gradients of more than 20º. Low friction co-efficient with bare back bottom. Two or three plies of synthetic fabrics provide high strength & flexibility

Food Grade (Hygienic) Conveyor Belt:

Grade	Conforming to Standards	Application
Food Grade (Hygienic)	As Per International Standards	These belts with white rubber covers do not impart odour and do not stain the materials to be conveyed and thus are particularly suitable for food processing and pharmaceuticals industries. These belts are manufactured with FDA approved polymers and are available in high abrasion resistant / antistatic / oil resistant cover grades.

SHOT BLASTING BELTS

These are special Endless belts used in shot Blasting machines in heavy industries. These are made up of 6 plies of 34 OZ Heavy Duty Cotton Fabric with total thickness 14 mm. These belts are available with holes and without holes also as per customer requirements.

ELEVATOR BELTS

PROPER BELT WIDTH

For buckets up to 16" (400mm) wide, the belt should be at least 1" (25mm) wider than the buckets.
For buckets wider than 16" (400mm) width, the belt should be at least 2" (50mm) wider than the buckets.

PROPER PULLEY FACE WIDTH

For belts up to 12" (300mm) wide, the pulley face width should be at least 1" (25mm) wider than the belt.
For belts greater than 12" (300mm) width, the pulley face width should be at least 2" (50mm) wider than the belt.

Product Features

We are the one-stop shop for various needs for Conveyor Belts. Some of the essential features of our Conveyor Belts are as follows:

High tensile resistance with low elongation
Good troughing and impact resistance
High flexibility of the carcass fabric to prevent bucking while wrapping on pulleys
Good interface adhesion of components for better flex life
Better load carrying over long haulage
Resistance to environmental operating conditions
Resistance to chemical products such as acid, oxidizing agents even at significant concentrations
Good surface electrical conductivity, good resistance to fire and flame propagation, etc.

Quality Objectives

We follow a stringent quality assurance policy to ensure superiority of our products. Our quality policy guides all our operations and helps us achieve our quality objectives. We have set certain quality objectives for ourselves which we strive to meet. They are as follows:

Satisfy our customer’s needs and expectations
Make commitments we fully understand and believe we can meet
Meet all commitments to customers on time
Verify that our products and services meet agreed requirements
Monitor, benchmark and continuously improve our business, products and services, organization's and employees' performance.

All our objectives are directed towards complete customer satisfaction. In addition, we also conduct various tests on the finalized Conveyor Products. These tests are done on the parameters of tensile strength, dimensional accuracy, load carrying capacity, surface electrical conductivity, etc.

Manufacturing Unit

To ensure efficiency and effectiveness in our processes, we have set up a unit which spreads across a wide area. The unit is well equipped with modern machinery and other equipment. We employ an efficient team of engineers and skilled labors, who operate and maintain these machinery. The team is backed by our designing department, which updates the manufacturing team about the latest trends and helps them incorporate the same. The raw material used in manufacturing are sourced from highly trusted vendors and all the manufacturing processes are supervised by qualified quality checkers. Once the product is finalized it is further tested before the delivery to the customer.

Why Us?

With three decades of rich experience, we have proven our worth in the industry. Our business sense and quality products are highly appreciated by our wide customer base. Some of the key traits that we possess are: